Uio pci generic
From ArmadeusWiki
Page under construction...
Informations on this page are not guaranteed !!
Introduction
It's possible to use the FPGA CycloneV throught PCIe without writing any driver on the APF6_SP
Kernel configuration
$ make linux-menuconfig
Device Drivers --->
<*> Userspace I/O drivers --->
<M> Generic driver for PCI 2.3 and PCI Express cards
Mounting the uio
- First load the uio_pci_generic driver:
$ modprobe uio_pci_generic
- Then bind the FPGA PCIe with following command:
$ echo "1172 e001" > /sys/bus/pci/drivers/uio_pci_generic/new_id
Links
- uio_pci_generic documentation.
