Uio pci generic: Difference between revisions
From ArmadeusWiki
(Created page with "Category: PCIe Category: UIO = Introduction = It's possible to use the FPGA CycloneV throught PCIe without writing any driver on the APF6_SP = Kernel configuration...") |
|||
| Line 29: | Line 29: | ||
<pre class="apf"> | <pre class="apf"> | ||
$ echo "1172 e001" | $ echo "1172 e001" > /sys/bus/pci/drivers/uio_pci_generic/new_id | ||
</pre> | </pre> | ||
* | * | ||
= Links = | = Links = | ||
* [https://www.kernel.org/doc/htmldocs/uio-howto/uio_pci_generic.html uio_pci_generic] documentation. | * [https://www.kernel.org/doc/htmldocs/uio-howto/uio_pci_generic.html uio_pci_generic] documentation. | ||
Revision as of 18:49, 7 March 2016
Introduction
It's possible to use the FPGA CycloneV throught PCIe without writing any driver on the APF6_SP
Kernel configuration
$ make linux-menuconfig
Device Drivers --->
<*> Userspace I/O drivers --->
<M> Generic driver for PCI 2.3 and PCI Express cards
Mounting the uio
- First load the uio_pci_generic driver:
$ modprobe uio_pci_generic
- Then bind the FPGA PCIe with following command:
$ echo "1172 e001" > /sys/bus/pci/drivers/uio_pci_generic/new_id
Links
- uio_pci_generic documentation.
