Uio pci generic: Difference between revisions
From ArmadeusWiki
mNo edit summary |
|||
| Line 1: | Line 1: | ||
[[Category: PCIe]] | [[Category: PCIe]] | ||
[[Category: UIO]] | [[Category: UIO]] | ||
{{Under_Construction}} | |||
= Introduction = | = Introduction = | ||
It's possible to use the FPGA CycloneV throught PCIe without writing any driver on the APF6_SP | It's possible to use the FPGA CycloneV throught PCIe without writing any driver on the APF6_SP | ||
Latest revision as of 17:50, 7 March 2016
Page under construction...
Informations on this page are not guaranteed !!
Introduction
It's possible to use the FPGA CycloneV throught PCIe without writing any driver on the APF6_SP
Kernel configuration
$ make linux-menuconfig
Device Drivers --->
<*> Userspace I/O drivers --->
<M> Generic driver for PCI 2.3 and PCI Express cards
Mounting the uio
- First load the uio_pci_generic driver:
$ modprobe uio_pci_generic
- Then bind the FPGA PCIe with following command:
$ echo "1172 e001" > /sys/bus/pci/drivers/uio_pci_generic/new_id
Links
- uio_pci_generic documentation.
