TSC2102 Linux driver
From ArmadeusWiki
Driver Installation
$ make linux-menuconfig
in 'device driver/input device support' select 'event interface' as kernel part in 'device driver/input device support' select 'touchscreen ->tsc2102' as module
in 'device driver/spi support' select 'spi support ->freescale iMX spi' as module in 'device driver/spi support' select 'spi support ->TSC2102 codec' as module
in 'device driver/hardware monitoring support' select 'hardware monitoring support' as module
TSLib API Installation
Install the touchscreen API tslib
Architecture
| Touchscreen (tsc2102_ts.ko) | HWmon | ALSA |
|---|---|---|
| TSC2102 Main driver (tsc2102.ko) | ||
| Linux API | ||
Usage
start the drivers:
# insmod /lib/modules/drivers/hwmon/hwmon.ko # insmod /lib/modules/drivers/spi/spi_imx.ko # insmod /lib/modules/drivers/spi/tsc2102.ko # insmod /lib/modules/drivers/input/touchscreen/tsc2102_ts.ko
Then:
- get temperature and voltage with hwmon (Hardware Monitoring) interface
cat /sys/class/hwmon/hwmon0/device/temp1_input -- result in m°C
- play sounds through ALSA interface
Quick test
To quickly check driver fonctionnality, touch the screen and check that tsc2102 interrupts count is increasing:
# cat /proc/interrupts
CPU0
26: 0 MPU IMX-uart
29: 17 MPU IMX-uart
30: 22 MPU IMX-uart
35: 12 MPU imx-mmc
39: 14 MPU I2C_IMX
40: 16 MPU imx-spi.2
41: 0 MPU imx-spi.1
59: 3682 MPU i.MX Timer Tick
60: 0 MPU DMA
61: 0 MPU DMA
110: 0 GPIO eth0
168: 0 GPIO tsc2102
Err: 0
#
Links
- http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=log;t=7 (search for TSC2102)
- http://osdir.com/ml/linux.ports.arm.omap/2006-08/msg00183.html
- Touchscreen usage on Blackfin
- Compiling TSlib
- http://www.opentom.org/Tslib
- http://www.openembedded.org/filebrowser/org.openembedded.packaged-staging/packages/tslib