APF27Dev: Difference between revisions
From ArmadeusWiki
No edit summary |
(Cleanup page) |
||
| Line 1: | Line 1: | ||
=Description= | ==Description== | ||
This is the Armadeus System's standard development board/baseboard for the [[APF27]] module. | This is the Armadeus System's standard development board/baseboard for the [[APF27]] module. | ||
| Line 7: | Line 7: | ||
* [[Controller_Area_Network|CAN Bus]] | * [[Controller_Area_Network|CAN Bus]] | ||
==Errata== | |||
=Errata= | * The APF27Dev DVI/HDMI output may not work correctly: due to a hardware issue on the Powerdown pin of the AD9889, the component may not work as expected (display not detected or going to sleep after some minutes). | ||
* The DVI/HDMI may not work correctly: due to a | |||
** Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76. | ** Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76. | ||
** Consequence: the AD9889 can no more be placed in low power mode by hardware. | ** Consequence: the AD9889 can no more be placed in low power mode by hardware. | ||
[[Image:apf27devfull_hdmi_issue.PNG]] | [[Image:apf27devfull_hdmi_issue.PNG]] | ||
==Resources== | |||
* [http://www.armadeus.com/english/products-development_boards-apf27_dev.html Product page] | |||
* [http://www.armadeus.com/_downloads/apf27Dev/hardware/apf27_devfull_12.pdf Schematics] | |||
* [http://www.armadeus.com/_downloads/apf27Dev/documentation/DataSheet_APF27Dev.pdf Datasheet] | |||
= | ==Feature list== | ||
=Feature list= | |||
{| border="0" cellpadding="5" cellspacing="5" summary="Hardware Add-Ons by functionnalities" | {| border="0" cellpadding="5" cellspacing="5" summary="Hardware Add-Ons by functionnalities" | ||
| Line 28: | Line 25: | ||
| | | | ||
==Audio== | ===Audio=== | ||
* [[TSC2101]]: audio in/out | * [[TSC2101]]: audio in/out | ||
==Video== | ===Video=== | ||
===Video Out=== | ====Video Out==== | ||
* [[LCD]] | * [[LCD]] | ||
* [[BackLight]] | * [[BackLight]] | ||
* [[FrameBuffer]] | * [[FrameBuffer]] | ||
* [[DVI_/_HDMI]] | * [[DVI_/_HDMI|DVI/HDMI]] | ||
===Video In=== | ====Video In==== | ||
*[[Camera_interface]] | *[[Camera_interface]] | ||
|| | || | ||
==User Input== | ===User Input=== | ||
* [[Keypad]] | * [[Keypad]] | ||
* [[TSC2101 |touchscreen]] | * [[TSC2101 |touchscreen]] | ||
==Wired communication== | ===Wired communication=== | ||
* [[Uart]] | * [[Uart]] | ||
* [[SPI]] | * [[SPI]] | ||
* [[I2C]] | * [[I2C]] | ||
* [[ | * [[USB Host]] | ||
* [[CAN_bus_Linux_driver]] | * [[CAN_bus_Linux_driver|CAN bus]] | ||
===Storage=== | |||
==Storage== | |||
* [[MultiMediaCard]] | * [[MultiMediaCard]] | ||
|| | || | ||
== | ===Realtime=== | ||
* [[RTC]] | * [[RTC]] | ||
==Other== | ===Other=== | ||
* [[ADC_max1027]] | * [[ADC_max1027|ADC (MAX1027)]] | ||
* [[Max5821]] | * [[Max5821|DAC (MAX5821)]] | ||
* [[PWM]]: PWM output J22 pin 4 (2.8V output if configured as output) | * [[PWM]]: PWM output is on J22 pin 4 (2.8V output, if configured as output) | ||
* [[ | * [[GPIO Driver]] | ||
* [[JTAG]] | * [[JTAG]] | ||
==FPGA== | ===FPGA=== | ||
* [[ | * [[Using FPGA]] | ||
[[Category:DevelopmentBoards]] | [[Category:DevelopmentBoards]] | ||
[[Category:Hardware]] | [[Category:Hardware]] | ||
Revision as of 10:41, 12 October 2010
Description
This is the Armadeus System's standard development board/baseboard for the APF27 module.
The following options are only populated on the "Full" version (APF27DevFull):
Errata
- The APF27Dev DVI/HDMI output may not work correctly: due to a hardware issue on the Powerdown pin of the AD9889, the component may not work as expected (display not detected or going to sleep after some minutes).
- Solution: remove R43 and connect pin PD/A0 (23) to GND. You can place a short circuit over C76.
- Consequence: the AD9889 can no more be placed in low power mode by hardware.
Resources
Feature list
Audio
VideoVideo OutVideo In |
User InputWired communicationStorage |
RealtimeOther
FPGA |
