MotionSystem: Difference between revisions
From ArmadeusWiki
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
The project is composed by different componants: | The project is composed by different componants: | ||
* A hardware board on which are plugged R/C servos, accelerometers and ADC multiplexers. | |||
* A FPGA firmware which manage R/C servo at low level. (Already written, thank to Sonzerro and Fabien Marteau) | |||
* A Linux Kernel Driver which manage the FPGA Firware, the ADC multiplexers and ADC | |||
==Participating Armadeus members== | ==Participating Armadeus members== | ||
* [[User:YvanR]] | * [[User:YvanR]] | ||
==Project data== | ==Project data== | ||
Revision as of 20:07, 19 August 2008
Project Description
The application field of this project is robotics.
The goal of this project is to provide a R/C Servos Controller to manage R/C by different ways, and a motion measurement system via accelerometers.
The project is composed by different componants:
- A hardware board on which are plugged R/C servos, accelerometers and ADC multiplexers.
- A FPGA firmware which manage R/C servo at low level. (Already written, thank to Sonzerro and Fabien Marteau)
- A Linux Kernel Driver which manage the FPGA Firware, the ADC multiplexers and ADC
