APF27: Difference between revisions
From ArmadeusWiki
No edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
The APF27 is the future main board which is currently developped by [http://www.armadeus.com Armadeus Systems]. | The APF27 is the future main board which is currently developped by [http://www.armadeus.com Armadeus Systems]. | ||
This product is a middle/high end | This product is a middle/high-end Single Board Computer targeted for low power applications and extended connectivity. | ||
Here is a list of the main features: | Here is a list of the main features: | ||
* Processor: Freescale i.MX27L (ARM9 @ 400MHz) | * Processor: [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX27&nodeId=0162468rH311432973ZrDR Freescale i.MX27/i.MX27L] (ARM9 @ 400MHz) | ||
* RAM: Mobile DDR. 32 to 256MB. 32 bits data bus. Default capacity will be either 64 or 128MB. | * RAM: Mobile DDR. 32 to 256MB. 32 bits data bus. Default capacity will be either 64 or 128MB. | ||
* Flash: Mobile NAND. 128 or 256MB, 16 bits data bus. | * Flash: Mobile NAND. 128 or 256MB, 16 bits data bus. | ||
| Line 16: | Line 16: | ||
All the i.MX27 peripherals and the FPGA signals can be accessed through two high density Hirose connectors like on the APF9328 board. | All the i.MX27 peripherals and the FPGA signals can be accessed through two high density Hirose connectors like on the [[APF9328]] board. | ||
[[Category:MainBoards]] | [[Category:MainBoards]] | ||
Revision as of 10:12, 1 October 2008
The APF27 is the future main board which is currently developped by Armadeus Systems.
This product is a middle/high-end Single Board Computer targeted for low power applications and extended connectivity.
Here is a list of the main features:
- Processor: Freescale i.MX27/i.MX27L (ARM9 @ 400MHz)
- RAM: Mobile DDR. 32 to 256MB. 32 bits data bus. Default capacity will be either 64 or 128MB.
- Flash: Mobile NAND. 128 or 256MB, 16 bits data bus.
- Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
- USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
- RS232: onboard Physical (RS232 compatible interface)
- FPGA: Xilinx Spartan 3A (50 to 400k gates)
- Supplies: high end DC/DC converters and LDOs on board. One external supply from 3.3 to 5V required.
- Mechanical dimensions: ~60x45mm
All the i.MX27 peripherals and the FPGA signals can be accessed through two high density Hirose connectors like on the APF9328 board.
