APF51: Difference between revisions
From ArmadeusWiki
(New page: ==Description== The APF51 is a high-end Single Board Computer targeted for advanced GUI, intensive computation and extended connectivity. Here is a list of the main features: * Processor:...) |
|||
| Line 4: | Line 4: | ||
Here is a list of the main features: | Here is a list of the main features: | ||
* Processor: [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX515 Freescale i.MX51] (Cortex-A8 @ 800MHz) | * Processor: [http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX515 Freescale i.MX51] (Cortex-A8 @ 800MHz) | ||
* RAM: Mobile DDR. 64 to 512MB. 32 bits data bus. Default capacity will be | * RAM: Mobile DDR 400. 64 to 512MB. 32 bits data bus. Default capacity will be 256MB. | ||
* Flash: Mobile NAND. 512MB, 8 bits data bus. | * Flash: Mobile NAND. 512MB, 8 bits data bus. | ||
* Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link) | * Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link) | ||
* USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link) | * USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link) | ||
* USB: 2 High speed Hosts with integrated PHY | * USB: 2 High speed Hosts with integrated PHY | ||
* | * FPGA: Xilinx Spartan 6 (LX9 or LX16). Default: LX9 | ||
* | * Touchscreen controler (4/5 wires) | ||
* Supplies: high end DC/DC converters and LDOs on board. Only one external supply of | * Low speed ADCs (up to 4) | ||
* RTC and Watchdog | |||
* Battery charger (Li-On/Li-Po) | |||
* Supplies: high end DC/DC converters and LDOs on board. Only one external supply of 5V required. | |||
* Low power sleep mode | * Low power sleep mode | ||
* Mechanical dimensions: ~00x00mm (TBD) | * Mechanical dimensions: ~00x00mm (TBD) | ||
All the i.MX51 peripherals (LCD, 2xSDIO, | All the i.MX51 peripherals (LCD, 2xSDIO, 2xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density [[Hirose connectors]]. | ||
==Resources== | ==Resources== | ||
Revision as of 17:52, 3 March 2011
Description
The APF51 is a high-end Single Board Computer targeted for advanced GUI, intensive computation and extended connectivity.
Here is a list of the main features:
- Processor: Freescale i.MX51 (Cortex-A8 @ 800MHz)
- RAM: Mobile DDR 400. 64 to 512MB. 32 bits data bus. Default capacity will be 256MB.
- Flash: Mobile NAND. 512MB, 8 bits data bus.
- Ethernet: onboard Physical (ready to use Ethernet 10/100Mbit link)
- USB: High speed USB OTG (OnTheGo) with onboard Physical (ready to use USB OTG link)
- USB: 2 High speed Hosts with integrated PHY
- FPGA: Xilinx Spartan 6 (LX9 or LX16). Default: LX9
- Touchscreen controler (4/5 wires)
- Low speed ADCs (up to 4)
- RTC and Watchdog
- Battery charger (Li-On/Li-Po)
- Supplies: high end DC/DC converters and LDOs on board. Only one external supply of 5V required.
- Low power sleep mode
- Mechanical dimensions: ~00x00mm (TBD)
All the i.MX51 peripherals (LCD, 2xSDIO, 2xSPI, 6xSerial, I2C, CSI, 3xUSB, keypad, PWM, etc...) and the FPGA signals can be accessed through two high density Hirose connectors.
Resources
- TBD
Feature list
VideoVideo OutVideo In |
Wired communicationUser Input |
StorageOther
FPGA |
