APF6Dev

Description

This is the Armadeus System's standard development board/baseboard for the APF6 module.

The following options are available:

• GPS
• GSM

Errata

• As the board is also used for APF6_SP module (APF6+FPGA), you might experience some miscellaneous FPGA LED blinking (beside "FPGA_SW" button) when no FPGA is present.

Resources

• Datasheet and schematics
• Product page on Armadeus Systems website

Feature list

Audio SGTL5000: audio in/out ALSA Video Out LCD BackLight FrameBuffer DVI/HDMI Video In Camera interface

User Input Touchscreen Wired communication UART SPI I2C USB Host USB_OTG USB_Gadget CAN bus PCIE Storage MultiMediaCard SATA

Realtime clock RTC Wireless communication WiFi usage on Linux Bluetooth usage on Linux FPGA connections HSMC connector JTAG Button Led Other PWM: PWM3 output is on J2 pin 26 (2.8V output) GPIOlib JTAG

• Using 7" 800x480 LCD with 3.10 legacy kernel:

BIOS> setenv extrabootargs video=mxcfb0:dev=lcd,800x480@60,if=RGB666,bpp=32

• Activating HDMI console with USB keyboard in U-Boot (since armadeus-6.0):

BIOS> usb start
BIOS> setenv stdout serial,vga
BIOS> setenv stderr serial,vga
BIOS> setenv stdin serial,usbkbd

keyboard map is english one and it seems not possible to change it (U-Boot 2014.07) ?

• to activate login in Framebuffer console, please uncomment /etc/inittab line 35 this way:

# Set up a getty on LCD
tty1::respawn:/sbin/getty 38400 tty1