Tianma TM035: Difference between revisions
From ArmadeusWiki
SebastienSz (talk | contribs) (→Description: "no more sold by Armadeus Systems" --> Not true !) |
SebastienSz (talk | contribs) (How to enable Tianma TM035) |
||
| Line 4: | Line 4: | ||
Module flat cable can be used to connect the TM035 to the [[APF28Dev]]. LCD resolution: 320x240. | Module flat cable can be used to connect the TM035 to the [[APF28Dev]]. LCD resolution: 320x240. | ||
==How to enable Tianma TM035 support on recent kernel (3.19+)== | |||
You have to edit the APF28Dev's device tree file. The file is ''buildroot/output/build/linux-XXX/arch/arm/boot/dts/imx28-apf28dev.dts'' . | |||
* Find the following lines and modify them as the comment says: | |||
<pre class="host> | |||
... | |||
lcdif@80030000 { | |||
pinctrl-names = "default"; | |||
pinctrl-0 = <&lcdif_16bit_pins_a | |||
&lcdif_pins_apf28dev>; | |||
//display = <&st0700>; | |||
/* | |||
* To use the Tianma TM035 LCD comment the line above | |||
* and uncomment the line below. | |||
*/ | |||
display = <&tm035>; | |||
status = "okay"; | |||
... | |||
</pre> | |||
* Rebuild the device tree and update the it on your board. | |||
==Features== | ==Features== | ||
Revision as of 16:59, 13 July 2015
Description
This Tianma's LCD module allowed you to add a display and a touchscreen to your APF28Dev.
Module flat cable can be used to connect the TM035 to the APF28Dev. LCD resolution: 320x240.
How to enable Tianma TM035 support on recent kernel (3.19+)
You have to edit the APF28Dev's device tree file. The file is buildroot/output/build/linux-XXX/arch/arm/boot/dts/imx28-apf28dev.dts .
- Find the following lines and modify them as the comment says:
...
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_16bit_pins_a
&lcdif_pins_apf28dev>;
//display = <&st0700>;
/*
* To use the Tianma TM035 LCD comment the line above
* and uncomment the line below.
*/
display = <&tm035>;
status = "okay";
...
- Rebuild the device tree and update the it on your board.
