Revision as of 15:38, 23 December 2014

APF6 eMMC layout

By default, the 4GB eMMC on APF6 board has 4 physical partitions.

Name	U-Boot name	Size	Comment
boot0	mmc dev x x	2MB	U-Boot is installed on this partition
boot1		2MB	Not used
rpmb		512K	Not used
User Data		remaining space	Kernel, device tree and rootfs

Offset	Comment
0
1 KB	U-Boot SPL (apf6-u-boot.spl)
69 KB	U-Boot IMG (apf6-u-boot.img)
512 KB
1024 KB	U-Boot environment
1536 KB	Redundant U-Boot environment

There are two primary partitions on the User data physical partition.

boot: The kernel and the device tree (inside a dtbs directory) are on this partition.
rootfs: the rootfs is on this partition

@@ Line 5: / Line 5: @@
 {| border="1" cellpadding="5" cellspacing="0" summary="Functionnalities test results"
 |----------------
-!Name || Size || Comment
+!Name || U-Boot name || Size || Comment
 |----------------
-|boot0 || 2MB || U-Boot is installed on this partition
+|boot0 || mmc dev x x|| 2MB || U-Boot is installed on this partition
 |----------------
-|boot1 || 2MB || Not used
+|boot1 || || 2MB || Not used
 |----------------
-|rpmb || 512K || Not used
+|rpmb || || 512K || Not used
 |----------------
-|User Data || remaining space || Kernel, device tree and rootfs
+|User Data || || remaining space || Kernel, device tree and rootfs
 |----------------
 |}