{{Note| '''The Chimei LW700AT has been replaced by the ST0700_adapt board.'''}}
This adaptor board allows you to connect a [http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html CHIMEY LW700AT LCD] to your DevFull.<br>
The description, the datasheet and the schematics of this adaptor board [http://www.armadeus.com/english/products-peripherals-lw700at_adapt.html can be found here.]
This adapter board allows you to connect a [http://www.armadeus.com/english/products-peripherals-st0700_adapt.html LCD] to your DevFull.<br>
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:
| '''TFT usage''' || flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt [[Image:LQ043_Adapt_to_APF27Dev.jpg|thumb|Connection between APF27Dev and LQ043_Adapt]] || flat cable (1) connected between X12 of the DevFull and X5 of the LCD_Adapt || On the Devlight V1, the LCD port is not prerouted. This means that you have to solder several wire between the vias corresponding to the LCD signals and a free place on the board where you can add a 2x15pins header. Take a look at the Devlight datasheet. You will find a table representing the bottom side of the board. On the board (bottom), you will see a silkscreen indicating the names of each vias. In the LQ043_Adapt datasheet, you will find the pin description of the 2x15 pins connector. Connect (1 to 1) the signals of the LQ043_adapt to the ones of the Devlight.The flat cable (1) is although required || flat cable(1) connected between X5 of the LCD_Adapt and LCD connector of the DevLight [[Image:LQ043_Adapt_to_DevLightV2.jpg|thumb|Connection between DevLight V2 and LQ043]]
| '''TFT usage''' || flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt [[Image:LW700AT_Adapt_to_APF27Dev.jpg|thumb|Connection between APF27Dev and LW700_Adapt]]
|----------------
|----------------
| '''Touchscreen usage''' || 4 wires cable (2) connected between X2 of the LCD_Adapt and J14 of the APF27Dev || 4 wires cable (2) connected between X2 of the LCD_Adapt and X32 of the DevFull || colspan="2" align="center" | For those who do not have the APF9328Devfull and would like to use a touch panel, a reserved space has been foreseen on the LQ043_adapt board to solder the [[TSC2102]] (U3) and a small regulator (LM317/U4) . This avoids developping or buying a dedicated PCB.In that case one more connection is required:
| '''Touchscreen usage''' || All touchscreen signal are provided by main flat cable.
* connect LQ043 X7 pin 2 (SSI_B5) with DevLight SSI1_TxDAT. No 4 wire cable is required. The TSC2102IDA and the LM317LIDR can be purchased or shipped as samples. Take a look at here: http://focus.ti.com/docs/prod/folders/print/tsc2102.html and http://focus.ti.com/docs/prod/folders/print/lm317l.html
|-
|-
|}
|}
Line 20:
Line 18:
==(1) Flat cable==
==(1) Flat cable==
A simple flat cable (PC like) can be used to connect the LQ043_Adapt to the [[APF27Dev]]/[[APF9328DevFull]]. If you do not have one, a ready to use cable [http://www.store.armadeus.com/index.php?language=en can be found here.] <br>
A simple flat cable (PC like) can be used to connect the LW700_Adapt to the [[APF27Dev]]. If you do not have one, a ready to use cable [http://www.store.armadeus.com/index.php?language=en can be found here.] <br>
Align the pins 1 (square via) on both boards together.
Align the pins 1 (square via) on both boards together.
'''Do not use long cables.'''
'''Do not use long cables.'''
==(2) 4 wires cable ==
==Features==
It is a simple one to one 4 wire cables (2.54mm single row headers on both boards: LQ043_adapt and Devfull)
Note:The Chimei LW700AT has been replaced by the ST0700_adapt board.
This adapter board allows you to connect a LCD to your DevFull.
The following table summarizes the possibilities to connect the LQW700AT and the Touchscreen to your development board:
APF27Dev
TFT usage
flat cable (1) connected between J10 of the APF27Dev and X5 of the LCD_Adapt Connection between APF27Dev and LW700_Adapt
Touchscreen usage
All touchscreen signal are provided by main flat cable.
(1) Flat cable
A simple flat cable (PC like) can be used to connect the LW700_Adapt to the APF27Dev. If you do not have one, a ready to use cable can be found here.
Align the pins 1 (square via) on both boards together.
Do not use long cables.
