ArmadeusWiki - User contributions [en]

Target Software Installation

2009-10-21T20:25:22Z

PhilippeL:

==Configure U-Boot==

===Environment variables===
U-Boot can be customized in a flexible way with the use of "environment variables/scripts".
The command '''printenv''' shows you most of them and their current value:
<pre class="apf">
BIOS> printenv
bootcmd=run jffsboot
bootdelay=20
baudrate=115200
ethaddr=
autoload=no
...
</pre>
The command '''setenv''' is used to change these variables. For example, to set the IP address (don't do it yet):
<pre class="apf">
BIOS> setenv ipaddr 192.168.0.10
</pre>
The command '''saveenv''' is used to save the state of your environment variables in FLASH memory; that way they will be available at next boot:
<pre class="apf">
BIOS> saveenv
Saving Environment to Flash...
. done
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
. done
Protected 1 sectors
</pre>

===Network configuration===
In order to use the U-Boot's network features, you have to set the network environment variables:
<pre class="apf">
BIOS> setenv netmask 255.255.255.0 (this default value should be fine in most situations)
BIOS> setenv ipaddr 192.168.0.10
BIOS> setenv serverip 192.168.0.2 (the IP address of your tftp server/PC hosting the files to download)
BIOS> setenv rootpath "/tftpboot/apf9328-root" (to boot Linux over NFS)
</pre>
You can use the '''dhcp''' command to configure these variables from your DHCP server. You probably will have to adjust the '''serverip''' variable manually.
<pre class="apf">
BIOS> dhcp
dm9000 i/o: 0x15c00000, id: 0x90000a46
MAC: 00:0e:32:00:00:01
operating at 100M full duplex mode
BOOTP broadcast 1
DHCP client bound to address 192.168.0.10
BIOS> setenv serverip 192.168.0.2
BIOS> saveenv
</pre>
Do not forget to save your changes in FLASH, to have them available at next power up:
<pre class="apf">
BIOS> saveenv
</pre>
In case of troubles you can use the following U-Boot script to reset the variables to the "factory"/default settings:
<pre class="apf">
BIOS> run flash_reset_env
</pre>

==Linux kernel installation==

* Check that your Armadeus kernel image size is smaller than the U-Boot partition (2MB on APF9328 and 4MB on APF27, with Armadeus 3.1):
<pre class="host">
[armadeus]$ ls -al buildroot/binaries/apf*/
</pre>
* If yes, copy it to your TFTP server directory (here ''/tftpboot/''); replace XX with your board name (apf9328 or apf27):
<pre class="host">
[armadeus]$ cp buildroot/binaries/apfXX/apfXX-linux.bin /tftpboot/
</pre>
* Load kernel image with U-Boot through network:
<pre class="apf">
BIOS> tftpboot ${loadaddr} apfXX-linux.bin
</pre>
or with the serial line:
<pre class="apf">
BIOS> loadb ${loadaddr}
''Ctrl+Altgr+\+c to access kermit command line then:''
(/home/.../) C-Kermit>send /tftpboot/apf9328-linux.bin
''After download is completed, you can type the c command to reconnect to the terminal:''
(/home/.../) C-Kermit>c
Connecting to /dev/ttyUSB0, speed 115200
Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------
## Total Size = 0x0013d0b0 = 1298608 Bytes
## Start Addr = 0x08000000
BIOS>
</pre>

----
{{Warning|If the loaded kernel image is too large, the following operation can destroy data that are stored after the partition limits (e.g. RootFS)}}
Check that transfered size value is less than 2097152 (0x200000 hex) on APF9328 or less than 5242880 (0x500000 hex) on APF27 with armadeus 3
<pre class="apf">
Bytes transferred = 1313216 (1409c0 hex)
</pre>
----

* You can test your new kernel image without flashing it with; if so you will have to reload it again after test:
<pre class="apf">
BIOS> bootm ${loadaddr}
</pre>
* Flash kernel image with:
<pre class="apf">
BIOS> run flash_kernel
</pre>
* To make it easier, you can use automatic scripts that will download the image and flash it. So next time you will only launch:
<pre class="apf">
BIOS> run update_kernel
</pre>
* If you only want to try a new kernel without flashing the kernel image you can launch it directly from RAM:
<pre class="apf">
BIOS> setenv bootargs ${console} ${mtdparts}; run addjffsargs addipargs; bootm
(the kernel image you want to try must have been loaded at ${loadaddr})
</pre>

==rootfs installation==

* check that your Armadeus RootFS image size is smaller than the RootFS partition (see [[#Flash_memory_partitions|Flash Memory Partitions]] for size allowances):
<pre class="host">
[armadeus]$ ls -al buildroot/binaries/apf9328/
...
[armadeus]$ cp buildroot/binaries/apf9328/apf9328-rootfs.arm.jffs2 /tftpboot/
</pre>
* Load RootFS image with U-Boot through network:
<pre class="apf">
BIOS> tftpboot ${loadaddr} apf9328-rootfs.arm.jffs2
</pre>
or serial line:
<pre class="apf">
BIOS> loadb ${loadaddr}
Ctrl+Altgr+\+c to access kermit command line then...
send pathtoyourhostedbuildrootdir/rootfs.arm.jffs2
</pre>
then you can type the c command to reconnect to the terminal

* Flash RootFS image with:
<pre class="apf">
BIOS> run flash_rootfs
</pre>
* Now you should be ready to test Linux:
<pre class="apf">
BIOS> boot
</pre>
* To make it easier, you can use automatic scripts. So next time you will only launch:
<pre class="apf">
BIOS> run update_rootfs
</pre>

==FPGA firmware installation==

The FPGA firmwares are all located in the ''firmware/'' directory of your Armadeus view:
[armadeus]$ ls firmware/
apf_pkg BRAMTest bus_led led PS2 PS2_Opencore servo sram_test wishbone_example Xtools
You can make some trials with the ''firmware/PS2/ps2_top.bit'' file. 
 

{{Warning| Check that your bitfile size is smaller than the firmware partition size (256KB) before trying the following commands or you may corrupt your Linux kernel FLASH partition !!!}}

* Load FPGA firmware image file with U-Boot through: 
Ethernet:
<pre class="apf">
BIOS> tftpboot ${loadaddr} fpgafirmware.bit
</pre>
''fpgafirmware.bit'' is of course the name of your bitfile stored in your TFTP shared directory (''/tftpboot/'')

or serial line:
<pre class="apf">
BIOS> loadb ${loadaddr}
Ctrl+Altgr+\+c to access kermit command line then...
C-Kermit> send path_to_your_tftp/fpgafirmware.bit
</pre>
then you can type the c command to reconnect to the terminal

* Test your new FPGA firmware's downloading:
<pre class="apf">
BIOS> fpga load 0 ${loadaddr} ${firmware_len}
</pre>
* Flash your firmware image with:
<pre class="apf">
BIOS> run flash_firmware
</pre>
* When your are satisfied with your firmware you can make it "autoloaded" at power up:
<pre class="apf">
BIOS> setenv firmware_autoload 1
BIOS> saveenv
</pre>

==Update U-Boot==

There are two steps to update U-Boot:
===Load the new U-Boot code in RAM===
You can use the following commands to download U-boot: 
*With Ethernet and a TFTP server:
<pre class="apf">
BIOS> tftpboot ${loadaddr} apf9328-u-boot.bin
</pre>
*With Ethernet and a NFS server:
<pre class="apf">
BIOS> nfs ${loadaddr} host_ip_addr:/nfs_path_to_buildroot/apf9328-u-boot.bin
</pre>
*With kermit and the serial/RS232 line
<pre class="apf">
BIOS> loadb ${loadaddr}
<CTRL><ALT GR>\
c
send path_to_buildroot/apf9328-u-boot.bin
c<ENTER>
</pre>

===Transfer code from RAM to Flash memory===
There is a simple U-Boot command/script to do that:
<pre class="apf">
BIOS> run flash_uboot
</pre>

Advanced informations can be found at the [[BootLoader]] wiki page.

==Flash memory partitions==
===APF9328 Flash memory partitions===
{| border="1" cellpadding="5" cellspacing="0" summary="Signal connections"
|- style="background:#efefef;" align="center"
! width="40%" | Armadeus 2.x address range (index from FLASH physical @ 0x10000000) !! width="40%" | Armadeus 3 address range (index from FLASH physical @ 0x10000000) !! Type
|- align="center"
|0x000000 - 0x03FFFF ( 256KB )
|0x000000 - 0x03FFFF ( 256KB )
| U-Boot
|- align="center"
|0x040000 - 0x5FFFF ( 128KB )
|0x040000 - 0x5FFFF ( 128KB )
| U-Boot environment variables
|- align="center"
|0x060000 - 0x9FFFF ( 256KB )
|0x060000 - 0x9FFFF ( 256KB )
| FPGA bitfile
|- align="center"
|0x0A0000 - '''0x21FFFF ( 1.5MB )'''
|0x0A0000 - '''0x29FFFF ( 2MB )'''
| Linux kernel image
|- align="center"
|'''0x220000''' - End of FLASH ( ~6 MB or ~14MB )
|'''0x2A0000''' - End of FLASH ( ~5.5 MB or ~13.5MB )
| Root filesystem
|}
 

===APF27 Flash memory partitions===
{| border="1" cellpadding="5" cellspacing="0" summary="Signal connections"
|- style="background:#efefef;" align="center"
! width="80%" | NAND flash address range !! Type
|- align="center"
|0x00000000 - 0x0009FFFF ( 640KiB including NAND SPL and 384kiB spare memory for bad blocks)
| U-Boot
|- align="center"
|0x000A0000 - 0x000FFFFF ( 384kiB )
| U-Boot environment variables
|- align="center"
| 0x00100000 - 0x0017FFFF ( 512 kiB )
| FPGA bitfile
|- align="center"
| 0x00180000 - 0x0067FFFF ( 5 MiB )
| Linux kernel image
|- align="center"
| 0x00680000 - End of FLASH ( >~250MiB )
| Root filesystem
|}

Members

2009-10-09T12:17:08Z

PhilippeL: /* Google Map */

==Google Map==

<googlemap lat="47" lon="6" width=640 height=480 zoom=4>
47.270377, 6.025314, [[User:JulienB]] Besancon
47.752598,7.301788, ARMadeus Systems
47.760791, 7.339897, [[User:Salocin68]] Mulhouse
47.734392,7.316975, [[User:FabienM]] Mulhouse
46.946161,7.517052, [[User:Jorasse]] Gümligen
47.681108, 7.390366, [[User:Carbure]] Helfranzkirch
47.436448, 8.429947, [[User:SonZerro]] Baden
44.653992, 6.176672, [[User:JulienN]] Chabottes
48.573342, 7.911476, [[User:KroMignon]] Legelshurst
42.734405, 2.894211, ELIAUS Perpignan
47.653363, 6.862335, UTBM Belfort
45.689589, 5.026395, [[User:OlivierT]] St Bonnet de Mure
48.879619, 2.351074, Paris - 20 members
43.622159, 1.442642, Toulouse - 2 members
-21.115141, 55.536384, La Réunion - 1 member
14.551684, -60.912323, La Martinique - 1 member
48.682805, 2.169186, [[User:BrunoL]] Les Ulis
47.399744, 8.53775, Zurich - 1 member
46.810282, 7.151241, Fribourg
47.574904, 7.580566, Basel

53.371859, -6.2677, Dublin - 1 member
50.637704, 5.608521, Liège - 1 member
50.67, 3.48, Velaines - 1 member
48.199964, 11.57959, Munich - 1 member
48.109588,-1.678752, Rennes - 1 member
47.750109,-3.366339, [[User:MatthieuT]] Lorient
48.70,2.03, [[User:JulienPeeters]] Chevreuse
45.190325, 5.700316, [[User:NicolasL]] Fontaine
49.279296, 2.472973 [[User:DavidC]] Nogent sur Oise
46.208644, 6.130027, [[User:EugeneR]] Genève
48.667158, 2.706585, [[User:BernardR]] Soignolles en Brie, France
45.188963, 5.709822, [[User:OlivierS]], [[User:HugoP|Hugo Petit]] - Grenoble, France
47.214613,-0.737329, [[User:BrunoS]] Chemillé, France
47.225164,-1.556625, [[User:KevinP]] Nantes, France
43.609234, 1.442642, [[User:PierreBa]] Toulouse, France
41.668809,-0.87616, [[User:AntonioMB]] Zaragoza, España
49.200145, 0.407136, [[User:JeanFrancoisR]] - Asnières
48.109588,-1.678752, [[User:MichelTe]] - Rennes
49.163073, 2.550201, [[User:JulienBa]] - Pontarmé
43.488299, 5.494709, [[User:FrankA]] - Meyreuil
43.622159, 1.442642, [[User:PierreAlexandreS]] - Toulouse, France
51.46513, -0.9692, [[User:AlexG]] - Reading, UK
43.312439, 10.517693, [[User:PaoloB]] - Cecina, Italy
52.63, 4.75, Alkmaar - 1 member
47.201843, -0.991516, [[User:SamuelM]] - Beaupreau, France
50.776093, 14.632759, [[User:PetrD]] - Cvikov, ČR
48.42097, -4.471693, [[User:OlivierR]] - Brest, France
48.575244,-4.563446, [[User:JeanChristopheL]] - Brest, France
49.417767, 2.826945, [[User:PhilippeL]] - Compiègne, France

</googlemap>
 
===How to add your position===
* go to http://maps.google.com/
* type in the name of your town and launch "Search Google Maps", for example:
[[Image:Google_maps_search.png]]
* right click on "Get URL of this page" and copy the URL
[[Image:Google_maps_url.png]]
* you should get something like that:
<pre>
http://maps.google.com/maps?f=q&hl=fr&geocode=&q=besan%C3%A7on&ie=UTF8&ll=47.257796,6.025314&spn=0.216236,0.601501&z=11&iwloc=addr
</pre>
* the data between ''&ll='' and ''&spn'' are the needed one (latitude/longitude)
* extract them and copy them in the "Edit" of this wiki page. Add it you wiki name and your town. For example:
<pre>
<googlemap lat="47" lon="6" width=640 height=480 zoom=4>
...
Others coordinates
...
47.257796, 6.025314, [[User:YourID]|YourName] - Your Town
</googlemap>
</pre>

[[Category:Association]]

Members

2009-10-09T12:16:36Z

PhilippeL: /* Google Map */

==Google Map==

<googlemap lat="47" lon="6" width=640 height=480 zoom=4>
47.270377, 6.025314, [[User:JulienB]] Besancon
47.752598,7.301788, ARMadeus Systems
47.760791, 7.339897, [[User:Salocin68]] Mulhouse
47.734392,7.316975, [[User:FabienM]] Mulhouse
46.946161,7.517052, [[User:Jorasse]] Gümligen
47.681108, 7.390366, [[User:Carbure]] Helfranzkirch
47.436448, 8.429947, [[User:SonZerro]] Baden
44.653992, 6.176672, [[User:JulienN]] Chabottes
48.573342, 7.911476, [[User:KroMignon]] Legelshurst
42.734405, 2.894211, ELIAUS Perpignan
47.653363, 6.862335, UTBM Belfort
45.689589, 5.026395, [[User:OlivierT]] St Bonnet de Mure
48.879619, 2.351074, Paris - 20 members
43.622159, 1.442642, Toulouse - 2 members
-21.115141, 55.536384, La Réunion - 1 member
14.551684, -60.912323, La Martinique - 1 member
48.682805, 2.169186, [[User:BrunoL]] Les Ulis
47.399744, 8.53775, Zurich - 1 member
46.810282, 7.151241, Fribourg
47.574904, 7.580566, Basel

53.371859, -6.2677, Dublin - 1 member
50.637704, 5.608521, Liège - 1 member
50.67, 3.48, Velaines - 1 member
48.199964, 11.57959, Munich - 1 member
48.109588,-1.678752, Rennes - 1 member
47.750109,-3.366339, [[User:MatthieuT]] Lorient
48.70,2.03, [[User:JulienPeeters]] Chevreuse
45.190325, 5.700316, [[User:NicolasL]] Fontaine
49.279296, 2.472973 [[User:DavidC]] Nogent sur Oise
46.208644, 6.130027, [[User:EugeneR]] Genève
48.667158, 2.706585, [[User:BernardR]] Soignolles en Brie, France
45.188963, 5.709822, [[User:OlivierS]], [[User:HugoP|Hugo Petit]] - Grenoble, France
47.214613,-0.737329, [[User:BrunoS]] Chemillé, France
47.225164,-1.556625, [[User:KevinP]] Nantes, France
43.609234, 1.442642, [[User:PierreBa]] Toulouse, France
41.668809,-0.87616, [[User:AntonioMB]] Zaragoza, España
49.200145, 0.407136, [[User:JeanFrancoisR]] - Asnières
48.109588,-1.678752, [[User:MichelTe]] - Rennes
49.163073, 2.550201, [[User:JulienBa]] - Pontarmé
43.488299, 5.494709, [[User:FrankA]] - Meyreuil
43.622159, 1.442642, [[User:PierreAlexandreS]] - Toulouse, France
51.46513, -0.9692, [[User:AlexG]] - Reading, UK
43.312439, 10.517693, [[User:PaoloB]] - Cecina, Italy
52.63, 4.75, Alkmaar - 1 member
47.201843, -0.991516, [[User:SamuelM]] - Beaupreau, France
50.776093, 14.632759, [[User:PetrD]] - Cvikov, ČR
48.42097, -4.471693, [[User:OlivierR]] - Brest, France
48.575244,-4.563446, [[User:JeanChristopheL]] - Brest, France
49.417767, 2.826945, [[User:PhilippeL]] - Pierrefitte/Seine, France

</googlemap>
 
===How to add your position===
* go to http://maps.google.com/
* type in the name of your town and launch "Search Google Maps", for example:
[[Image:Google_maps_search.png]]
* right click on "Get URL of this page" and copy the URL
[[Image:Google_maps_url.png]]
* you should get something like that:
<pre>
http://maps.google.com/maps?f=q&hl=fr&geocode=&q=besan%C3%A7on&ie=UTF8&ll=47.257796,6.025314&spn=0.216236,0.601501&z=11&iwloc=addr
</pre>
* the data between ''&ll='' and ''&spn'' are the needed one (latitude/longitude)
* extract them and copy them in the "Edit" of this wiki page. Add it you wiki name and your town. For example:
<pre>
<googlemap lat="47" lon="6" width=640 height=480 zoom=4>
...
Others coordinates
...
47.257796, 6.025314, [[User:YourID]|YourName] - Your Town
</googlemap>
</pre>

[[Category:Association]]

MemberList

2009-10-09T12:13:58Z

PhilippeL: /* Here is the list of the (active) members and their skills */

==Here is the list of the (active) members and their skills==

This list is maintained by the users themself.

*0: Novice
*1: Notions. At least one successfull experiment
*2: Confirmed
 

{| border="1" cellpadding="5" cellspacing="0" summary="Signal connections"
|- style="background:#efefef;"
! '''Name / IRC Nickname''' || '''Linux Apps'''|| '''Linux Drivers'''|| '''FPGA''' || '''Board Design''' || '''Projet/Domain'''
|----------------
|[[User:Salocin68|Nicolas Colombain / Salocin]] || 1 || 1 || 1 || 2 || domotics
|----------------
|[[User:JulienB|Julien Boibessot / Artemys]] || 2 || 2 || 0 || 1 || multimedia
|----------------
|[[User:JeanBaptisteM|Jean-Baptiste Mayer / JiBee]] || 2 || 1 || 1 || 1 || robotics
|----------------
|[[User:NicolasA|Nicolas Aguirre]] || 2 || 0 || 1 || 1 || multimedia
|----------------
|[[User:BenoitC|Benoît Canet]] || 2 || 0 || 0 || 0 || multimedia
|----------------
|[[User:SonZerro|Sonzerro]] || 0 || 0 || 1 || 2 || domotics
|----------------
|[[User:HenriG|Henri Geist]] || 1 || 1 || 0 || 1 || robotics
|----------------
|[[User:BorredonB|Bernard Borredon]] || 2 || 1 || 0 || 1 || domotics
|----------------
|[[User:ThomasB|Thomas Bores]] || 2 || 0 || 0 || 1 || Entertainment
|----------------
|[[User:FabriceM|Fabrice Mousset / KroMignon]] || 1 || 1 || 2 || 1 || Domotics & multimedia
|----------------
|[[User:AmineH|Amine EL HEDADI]] || 2 || 2 || 0 || 0 || domotics & robotics
|----------------
|[[User:PhilippeM|Philippe Monteil]] || 2 || 0 || 0 || 0 || multimedia
|----------------
|[[User:CedricZ|Cédric Zmyj]] || 0 || 0 || 0 || 0 || domotics & robotics
|----------------
|[[User:JeanMichelN|Jean Michel Naimo / jeanmi12 ]] || 2 || 1 || 1 || 1 || Domotics & entertainment
|----------------
|[[User:OlivierC|Olivier Coutanceau]] || 1 || 0 || 0 || 0 || multimedia
|----------------
|[[User:ArnaudC|Arnaud COFFINET]] || 0 || 0 || 1 || 2 || multimedia & domotics
|----------------
|[[User:SylvainP|Sylvain PARRINO]] || 2 || 1 || 0 || 0 || robotics
|----------------
|[[User:AurelienH|Aurélien HIRON]] || 2 || 0 || 0 || 1 || robotics
|----------------
|[[User:GuillaumeT|Guillaume TRANNOY]] || 0 || 0 || 0 || 2 || domotics & robotics
|----------------
|[[User:JulienN|Julien NICOLAS / jujun]] || 2 || 1 || 0 || 1 || multimedia & network
|----------------
|[[User:StephaneF|Stéphane Falck]] || 0 || 0 || 0 || 0 || multimedia & robotics & domotics
|----------------
|[[User:GillesD|Gilles DUSSIN/ Sellig]] || 1 || 0 || 1 || 1 || robotics
|----------------
|[[User:MaximeL|Maxime Liron]] || 0 || 0 || 0 || 0 || domotics, robotics & multimedia
|----------------
|[[User:NicolasC|Nicolas CHARLERY/ realniko]] || 2 || 0 || 0 || 0 || electronic
|----------------
|[[User:BenoitJ|Benoit JESTER]] || 0 || 0 || 0 || 0 || robotics
|----------------
|[[User:FabienM|Fabien MARTEAU/ FabM]] || 1 || 2 || 1 || 1 || robotics,domotics
|----------------
|[[User:XavierA|Xavier AZNAR]] || 1 || 1 || 0 || 0 || environment, entertainment, domotic
|----------------
|[[User:AlbericA|Albéric AUBLANC / PoueT]] || 2 || 0 || 1 || 0 || domotics & multimedia, robotics, entertainment,
|----------------
|[[User:FredericB| Frédéric Blain / creber]] || 2 || 1 || 0 || 0 || system, domotics
|----------------
|[[User:JeanBaptisteMa| Jean-Baptiste Maillet]] || 2 || 1 || 0 || 0 || system
|----------------
|[[User:JeanFrancoisR| Jean-François Rousval]] || 2 || 1 || 0 || 1 ||
|----------------
|[[User:JulienPeeters| Julien Peeters]] || 2 || 1 || 0 || 0 || domotics, real-time, entertainment, network
|----------------
|[[User:YoannC| Yoann Congal / Alpheb]] || 0 || 0 || 0 || 1 || robotics
|----------------
|[[User:MatthieuT| Matthieu Texier / weeber]] || 1 || 0 || 1 || 0 || robotics, real-time
|----------------
|[[User:MartialG| Martial Guex]] || 2 || 1 || 1 || 2 || transceiver RF, real-time, wireless
|----------------
|[[User:NicolasL| Nicolas Lantz]] || 2 || 2 || 1 || 1 ||
|----------------
|[[User:GuillaumeD| Guillaume DELVIT]] || 1 || 1 || 1 || 1 || system, asynchronous CPU
|----------------
|[[User:BernardR|Bernard REMOND ]] || x || x || x || x ||
|----------------
|[[User:SamirH| Samir HAMNACHE]] || 0 || 0 || 0 || 1 || électronique
|----------------
|[[User:OlivierT|Olivier TARDIEU]] || 0 || 0 || 0 || 1 || électronique,robotics,domotics
|----------------
|[[User:ThibautR|Thibault Rétornaz]] || 1 || 1 || 1 || 0 || bio-med, électronique
|----------------
|[[User:BrunoS|Bruno Suarez]] || 2 || 0 || 0 || 0 || bio-med, électronique
|----------------
|[[User:guillaumeDe|Guillaume Denis]] || 0 || 0 || 2 || 1 || Electronique numérique, FPGA
|----------------
|[[User:KevinP|Kévin PETIT]] || 1 || 0 || 1 || 1 || Multimedia
|----------------
|[[User:PierreBa|Pierre Baudemont / b4ud3]] || 2 || 0 || 1 || 0 || domotics, robotics
|----------------
|[[User:BrunoL|Bruno Landré]] || 0 || 0 || 0 || 0 || robotics
|----------------
|[[User:AntonioMB|Antonio Meléndez]] || 0 || 0 || 1 || 2 || domotics, robotics, eletcronics
|----------------
|[[User:MichelTe|Michel Le Mer]] || 0 || 0 || 2 || 2 || electronics, software
|----------------
|[[User:JulienBa|Julien Baley]] || 0 || 0 || 0 || 0 ||
|----------------
|[[User:FrankA|Frank ANJEAUX]] || 1 || 0 || 0 || 1 || software,robotics, domotics, electronics
|----------------
|[[User:JulienViaud|Julien viaud/polric]] || 2 || 0 || 1 || 1 ||
|----------------
|[[User:NicolasCa|Nicolas CARTIER]] || 1 || 1 || 0 || 2 || domotics & robotics
|----------------
|[[User:PierreAlexandreS|Pierre Alexandre SCHEMBRI]] || 2 || 1 || 2 || 2 || electronics, board design, embedded software, FPGA, robotics, low power
|----------------
|[[User:AlexG|Alex GONZALEZ]] || 2 || 2 || 0 || 1 || telecommunications, network & multimedia
|----------------
|[[User:JulienL|Julien Lefrique / apapi]] || 1 || 0 || 1 || 1 ||
|----------------
|[[User:PaoloB|Paolo Bernini / nihil84]] || 2 || 1 || 0 || 0 || robotics, real-time
|----------------
|[[User:MichielE|Michiel Ettema]] || 0 || 0 || 0 || 1 || telecommunications, networking
|----------------
|[[User:NicolasD|Nicolas Duclos]] || 2 || 1 || 0 || 0 || telecommunications, domotics and funs
|----------------
|[[User:SebastienP|Sebastien Philippe]] || 1 || 2 || 1 || 2 || electronics, board design, embedded linux
|----------------
|[[User:PaulM|Paul MONSINJON]] || 1 || 1 || 2 || 1 || robotics, fpga, embedded linux
|----------------
|[[User:OlivierR|Olivier REYNET]] || 1 || 0 || 0 || 0 || robotics, linux, networking
|----------------
|[[User:HugoP|Hugo Petit]] || 0 || 0 || 1 || 2 || electronics, automotive, board design, embedded software
|----------------
|[[User:PhilippeL|Philippe Leduc]] || 1 || 0 || 1 || 1 || robotics, real-time, embedded software, domotic
|}

==Links==
* [[Members | Geographical position of the members]]

[[Category:Association]]